CUSTOM  MADE LOGOS FOR OTHER AIRPLANES
ALSO AVAILABLE - SEE DETAILS BELOW

 

DATA PLATE
WITH CUSTOM LOGO

This CNC milled Data Plate is just what you need for the finishing touch to your airplane.  Milled from 6061 T6.  
Finished Size is 4" X 3"


 

Custom Paint Your Data Plate To Match Your Airplane

                                                       Below, Blaine Tell Us Just How He Did It

1-  Deburr the edges of the data plate and lightly sand the face with 400 grit wet or dry
2-  Clean face of data plate with lacquer thinner and let dry
3-  Dab paint in grooves (not whole surface) with very small paint brush (Hobby Lobby).
      I did this under a magnifying glass that has a light. Let dry.
4-  Lightly sand face with wet or dry starting with 320 grit, then 400 then 600. I started with 320 because I
     had a few places where the paint was thick and I wanted to cut it down to the aluminum easily and 400
     was not getting it done
5-  Use 320 until the paint has been removed from the surface, Not necessarily down to shiny aluminum, just
     enough so the 400 grit will get the rest of the paint off
6-  Use 600 to make a smooth, consistent surface
7-  Coat with a clear coat. I used Rustoleum Clear Matte in a spray can. I did two light coats.
      I wanted to keep the aluminum from  oxidizing
8-  Send George a picture of the results!

 

Here is John Austin's 750 Data Plate.

He filled in the lettering to match his fuselage color, which is "Gecko Green."

Really very nice looking job!

Here is a  new design for the RV Series of airplanes.    Shown are the RV-9 & RV-7.I can place a pictures of any RV you have on your Data Plate.  This makes a very nice touch to your completed airplane.

 New for the ONEX & WAIEX- Both Tail Dragger & Tri-Gear Are Available

       

     
   

WITH YOUR ORDER:
    1.  Send Cash, Check, or Money Order with order.
    2.  Please include your Name and Mailing Address & Zip
    3.  You can pay with PayPal to my eMail address:  
george@mrrace.com
    4.  If you use PayPal send me an eMail with your order details.
   
 5.  Include all above Data Plate information with order.  PLEASE PRINT CAREFULLY.  

  Click Here -- To Ask Question Or Leave Comment  

 CLICK HERE TO GO BACK  

ORDER FROM:
George Race
3865 Gibbs Rd.
Albion, MI  49224

1 CNC Milled Data Plate
$22.50

  Postage in U.S.  
  $4.00 Per Order  


Please send email for out of country
additional postage cost.

View My Stats